At last, the case you can’t afford not to buy! They’re up to 60% lighter than our traditional ATA cases, but even stronger, and here’s the best part… within the first few trips they pay for themselves!

FlyWeight™ is a sandwich panel made of an aerospace composite material with protective layers of unidirectional fiberglass on both sides. Developed for the aircraft industry for use as floor panels, galleys storage bins, the goal was to produce panels with very high strength-to-weight ratios as well as superior fire smoke suppression characteristics. These materials are used in every commercial military aircraft being manufactured in the world today.

• FlyWeight™ cases pay for themselves in drayage savings!

  For Example:   1/2” Ply Workbox, 358 Lbs
                          FlyWeight™ Workbox, 211 Lbs
  Drayage savings per show – 4-5 shows pays for upgrade to FlyWeight™, 13 shows pays for case itself.

• FlyWeight™ is greener for the planet earth through reduced fuel consumption
  
  
• ½” plywood weighs 14-18 lbs per cubic foot vs. FlyWeight™ at an average of 6 lbs per cubic foot

FlyWeight™ generates the biggest benefit in cases that are 4’X2’X2’ or larger because in cases smaller than this metal hardware and casters are a larger percentage of the total weight of the case.

A&S FlyWeight™, it really pays to put it to work for you… today!

Call A&S or email info@ascase.com today to work with our designers for your custom exhibitor needs. You tell us what you want, and we make it a reality.

* All cases can be manufactured out of ACX Fir Ply or Hex Material.